CI093 Cast Iron Y-Type Strainer PN-16 (Flanged)

ci093
  • Item Code: CI0093
  • Pressure Rating: PN-16
  • Testing Standard: Mfg. Standard
  • Size Range: 40mm to 300mm
  • Product Standard: Mfg. Standard

Suitable For

ci093

Material Specification

P. NO. NAME OF PART MATERIAL SPECIFICATION
1 BODY CAST IRON BSEN 1561 Gr. 200
2 SCREEN STAINLESS STEEL TYPE 304
3 GASKET C.N.A.F. IS 2712 Gr. C
4 COVER CAST IRON BSEN 1561 Gr. 200
5 BOLTS CARBON STEEL BS 4190
6 GASKET C.N.A.F. -------
7 DRAIN PLUG CAST IRON BSEN 1561 Gr. GJL 200
ci093
ci093

Dimensional Data

ci093
 
SIZE (mm) 40 50 65 80 100 125 150 200 250 300
L±1.6 145 180 200 225 283 325 360 440 510 593
T 15.9 19.1 19.1 19.1 22.2 22.2 22.2 25.4 25.4 28.6
∅D 133.5 152.4 165.1 184.1 216 254 279.4 336.5 406.4 457.2
~H 103 126 137 158 210 247 280 380 441 521
K 98.4 114.3 127 146 184.1 209.5 235 292.1 355.6 406.4
∅d 14.3 17.5 17.5 17.5 17.5 17.5 22.3 22.3 22.3 25.4
n 4 4 4 4 8 8 8 8 12 12

Principle Features

INTRODUCTION

Leader ’Y’ type Strainer offers best solution for separation and segregation for pump protection, flow meter protection, valves protection, regulator protections. In water handling equipment it works to save from damage through sand or any other solid particles.

  • Designed to manufacturer standard.
  • Y’ Type pattern, Bolted Cover.
  • SS (Type 304) Screen Having 1mm Dia Perforation snugly fitted on machined surface to ensure no particle larger than the screen opening can escape around the end of the screen.
  • Filtration area approximately 3 times more than flow bore area of the body.
  • Body cavity with largest possible filtration area to counter decrease in flow rate caused by clogging.
  • Fine finish and smooth contours of flow way reduce the pressure drop.
  • Screen is guided both in body and cover.
  • Strainer may be installed in vertical lines and horizontal lines with effectiveness.
  • Drain plug is provided on the valve to drain out the foreign particles accumulated in the strainer.
  • Flanged ends to BS 10 Table ’E’ (FF).

END CONNECTION

  • Flanges as per BS:10 Table ’E’( FF) Drilled.
  • Flange drilling as per other standards also available upon request.

UTILISATION & SERVICE

  • “LEADER” Cast Iron ’Y’ Type Strainer are suitable for above-ground installations.
  • Best suited for potable water, treated fresh water, neutral liquids & some gases.

WORKING PRESSURE

  • Maximum Working Pressure: 16 Bar.
  • See Pressure / Temperature Diagram.

TEMPERATURE LIMITS

  • Maximum Working Temperature: 220°C.
  • See Pressure / Temperature Diagram.

TEST PRESSURE (Hydrostatic)

Rating PN-16
Body (Hyd.) 24 Bar

Download

Product Enquiry for CI093 Cast Iron Y-Type Strainer PN-16 (Flanged)