GM018 Gun Metal / Bronze Globe Valve PN-25 (Flanged)

GM018
  • Item Code: GM018
  • Pressure Rating: PN-25
  • Testing Standard: BSEN 12266 PART-1
  • Size Range: 15mm to 100mm
  • Product Standard: Mfg. Standard

Suitable For

suitable color
GM018

Material Specification

GM018
P. No. NAME OF PART MATERIAL SPECIFICATION
  1 BODY GUN METAL BSEN 1982 Gr.CC491K
  2 DISC GUN METAL BSEN 1982 Gr.CC491 K
  3 STEM NUT GUN METAL / BRASS BSEN 1982 Gr.CC491K / DIN EN12165 Gr.CW617N
  4 STEM HT BRASS DIN EN 12165 CW721R
  5 BONNET GUN METAL BSEN 1982 Gr.CC491K
  6 GLAND PACKING TO SUIT SERVICE CONDITIONS  
  7 GLAND BRASS / GUN METAL DIN EN12165 Gr.CW617N / BSEN 1982 Gr.CC491K
  8 GLAND NUT BRASS / GUN METAL DIN EN12165 Gr.CW617N / BSEN 1982 Gr.CC491K
  9 HAND WHEEL MILD STEEL / CAST IRON SHEET / BSEN 1561 Gr.200
  10 WASHER CARBON STEEL ------------
  11 SET SCREW CARBON STEEL ------------
GM018

Dimensional Data

GM018
SIZE (mm) 15 20 25 32 40 50 65 80 100
L±1.6 55 64 75 82 98 110 156 162 196
b∅ 12.7 20 25 32 40 50 65 80 100
H~ 68 75 100 109 135 140 162 220 235
HW∅ 60 60 70 80 111 111 135 165 195
D∅ 95 105 115 140 150 165 185 200 235
T 8 8 9 9 11 11 13 14 17
K 65 75 85 100 110 125 145 160 190
n 4 4 4 4 4 4 8 8 8
d 14 14 14 18 18 18 18 18 22
Item Code GM 018 GM 018 GM 018 GM 018 GM 018 GM 018 GM 018 GM 018 GM 018

Principle Features

  • Screwed in bonnet, inside screw rising stem.
  • Flanged ends as per BS:4504 PN-25.
  • Gun Metal / Brass working parts, integral seat.
  • Provision for re-packing under pressure in the installed condition.
  • Wear-resistant solid and long-lasting materials.
  • Sheet metal handwheel offers better strength & convenient operation.
  • Easy visual control of open/closed position marked on the handwheel/nameplate.
  • Available with open-shut indicator & locking arrangement on request.
  • Also available with PTFE Seating for Air and Gas applications, at an extra cost.

PRESSURE RATING: PN-25

TEST PRESSURE(Hydrostatic)
BODY SEAT
37.5 BAR (g) 27.5 BAR (g)

END CONNECTION

  • Flanged ends as per BS:4504 PN-25.
  • Flange drilling as per other standards also available upon request at an extra cost.

UTILISATION & SERVICE

  • "LEADER" Gun Metal Gate valves are suitable for above-ground installations.
  • Best suited for hot & cold water, air, neutral liquids & some gases.

WORKING PRESSURE

  • Maximum Working Pressure: 25 Bar.
  • See Pressure/Temperature Diagram.

TEMPERATURE & LIMITS

  • Maximum working temperature: 225°C.
  • See Pressure / Temperature Diagram.

Download

Product Enquiry for GM018 Gun Metal / Bronze Globe Valve PN-25 (Flanged)